Manufactura de tableros mineralizados a partir de partículas de madera de importación
Article Sidebar
Main Article Content
Abstract
Se dan a conocer los resultados obtenidos en la fabricación a escala de laboratorio, de pequeños módulos de 0,2 m² de superficie, preparados con astillas de pino de importación compactadas en frío con cemento gris P-350. Esta investigación contempla ocho variantes del balance material de los componentes del producto elaborado, que posibilitan definir que tanto la relación madera-cemento 1:2,00 como 1:2,75 en peso, son factibles de utilizar en la formulación para tableros de 19 mm con peso volumétrico de 1200 kg/m³, ya que alcanzan una resistencia a la flexión estática comprendida entre 60-110 kg/cm², lo cual supera como promedio cuatro veces el límite establecido para la tecnología de la firma BISON-WERKE (18 kg/cm²). No obstante, se advierte que la dosificación 1:2,00 es favorable en el sentido de que se logra un panel coherente con un consumo inferior de aglutinante.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms of the License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0):
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
The journal is not responsible for the opinions and concepts expressed in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. They are accepted to publish original scientific papers, research results of interest that have not been published or sent to another journal for the same purpose.
The mention of trademarks of equipment, instruments or specific materials is for identification purposes, and there is no promotional commitment in relation to them, neither by the authors nor by the publisher.