Aptitud de la madera de ocho especies latifolias que crecen en cuba para la fabricación de aglomerados con cemento
Main Article Content
Abstract
The study was carried out a order to determine the degree of likeness with the cement Portland of the wood of 8 forest species that are developed in two solid mountainous of Cuba (Guaniguanico and Sagua-Nipe-Baracoa). The method of mensuration of the hydration the temperature of the wood - cement samples was compared with neat cement. It was proven that of the 8 species, the four corresponding to the solid of Guaniguanico present different degrees of compatibility – Quercus cubana to Rich, Pithecellobium arboreum L., Poeppigia procera Prest and Zanthoxylum elephanteasis Macfd.–, while the remaining ones that Sagua-Nipe-Baracoa grows in the area Mac are incompatible –Lysiloma sabicu A. Rich, Guaiacum officinale (L.), Gliricidia sepium (Jacq.) Steud, Hebestigma cubense (H B K.) Urb.–. The species clasificated is well and regular are considered to possible raw source of rural housing.
Downloads
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms of the License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0):
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
The journal is not responsible for the opinions and concepts expressed in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. They are accepted to publish original scientific papers, research results of interest that have not been published or sent to another journal for the same purpose.
The mention of trademarks of equipment, instruments or specific materials is for identification purposes, and there is no promotional commitment in relation to them, neither by the authors nor by the publisher.
How to Cite
References
Arguello, R.; M. Gatani; H. Berreta: «Componentes constructivos con cáscara de cacahuete (maní) y cemento. Primeros estudios sobre las incompatibilidades físico-químicas en el fraguado del material», Seminario Iberoamericano de Tecnología de Materiales, Subprograma CYTED, La Habana, 2005.
Cabangon, R. C.; D. A. Eusebio; F. P. Soriano; R. B. Cunningham; C. Doneely; P. D. Evans: «Effect of Post-Harvest Storage on the Suitability of Acacia mangium for the Manufacture of Wood Wool Cement Board», ACIAR, Proceeding of Workshop of Wood Cement Composites in the Asia-Pacific region, Canberra, 2002.
Dewitz O.; K. D. Kuschy; G. Lehmann; S. Kalushe: «Influencia del tipo de madera sobre la elaboración de tableros mineralizados», Helft 3 (4):178181, 1981.
Fernandez, E.; V. Taja: «The Use and Processing of Rice Straw in the Manufacture of Cement Bonded Fibreboard», ACIAR. Proceeding of Workshop of Wood cement Composites in the Asia- Pacific region, Canberra, 2002.
Irle, M.; H. Simpson: «Agriculture Residues for Cement Bonded Composites», University of Wales, Bangor, 1994.
Klatt, R.; S. Spiers: «Rice Hulls. A Unique Building Material for the Manufacture of Extrude composite». ACIAR. Proceeding of a Workshop Wood Cement Composites in the Asia-Pacific region, Canberra, 2002.
Ma, L., Y. Kuroki; W. Nagadomi; W. Subiyanto; S. Hawai: «Manufacture of Bamboo-Cement Composites
I. Hydration Characteristics of Bamboo-Cement Mixtures», Journal of the Japan Wood Research Society 42 (1):34-42, 1996.
Manzanares, K.; D. Velázquez; Ma. A. Guyat: .«Aptitud de algunas especies de bambúes en la construcción ecológica», Representación FAO en Cuba, La Habana, http:/. www. fao. cubasi. Cu, 2004.
Sandermann, W.; R. Kholer: «Studies on Mineral Bonded Wood Materials IV. A Short Test of the Aptitudes of Woods for Cement Bonded
Materials», Holzforshung, 18(12):53-59, 1964.
Semple, K.; R. Cunningham; P. D. Evans: «Compatibility of Eight Temperate Australian Eucalyptus Species with Portland Cement». Proceeding of Worshop Wood Cement Composites in the AsiaPacific region, ACIAR, Canberra, 2002.
Sutigno, P.: «Effect of Aqueous Extraction of Wood Wool on the Properties of Wood Wool Cement Board Manufactured from Teak (Tectona grandis)». Proceeding of Workshop Wood Cement Composites in the Asia- Pacific region, ACIAR, Canberra, 2002.
Valenzuela, W.; T. Cruz: «Aptitud de la madera de cinco especies forestales para fabricar tableros de fibrocemento», Revista Forestal del Perú, 11 (1-2):3-16, 1983.
Velázquez, D.; .M. Castillo; K. MANZANARES: «Compatibilidad de especies maderables de La Palma para formar aglomerados», Revista Forestal Baracoa (1):79-86, 2004.
Velázquez, D.; K. Manzanares.; C. Guerra: «Residuos maderables. Aptitud de nueve especies latifolias de diferentes macizos montañosos para la fabricación de ecomateriales» Revista Forestal Baracoa 24(1):41-47, 2005.
Vilela, E.; B. Du Pasquier: «Determinación del coeficiente de aptitud de un grupo de maderas para su posible aplicación en la fabricación de tableros de pajilla de madera», Revista Forestal Venezolana 11(16):75-84, 1968.