Modelo matemático para la predicción del rendimiento a compresión en Pinus tropicalis Mor. a escala de laboratorio
Article Sidebar
Main Article Content
Abstract
With the employment of optimization technical the formulations were evaluated on cubic test of mineral bonded wood composites materials with Pinus tropicalis Morelet the specie.
They were 16 experiments distributed according to a design 2 7-4 and it also get ready a race of 15 experiments developed with a three-dimensional plan with ± = 2. It was obtained a polynomial of answer of the compression test and the representative geometric figure of the evaluated factorial space. A formulation optimized was an alternative binder composed by little cement
Portland consumption and the incorporation of hydrate of lime as partial substitute of the basic adhesive.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms of the License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0):
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
The journal is not responsible for the opinions and concepts expressed in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. They are accepted to publish original scientific papers, research results of interest that have not been published or sent to another journal for the same purpose.
The mention of trademarks of equipment, instruments or specific materials is for identification purposes, and there is no promotional commitment in relation to them, neither by the authors nor by the publisher.
How to Cite
References
Hernández, E.; E. Press: Tecnología de los productos de hormigón, Ed. Pueblo y Educación, La Habana, 1987.
Pimentel, L.; A., Beraldo: «Pinus caribaea Wood Portland Cement Mortar Composite for Oofing Tiles Fabrication», Proceeding Agribuilding, Campinas, Universidad Sao Paulo, Brasil, 2001.
Savastano, H.: «Sustainable Cement Based Material and Techniques for Rural Construction», Proceeding Agribuilding, Campinas, Universidad Sao Paulo, Brasil, 2001.
Soriano, F.: «Abriendo las puertas a una nueva tecnología», Revista Forestal Tropical 9 (1):8-11, 2001.
Takano, T.; K. Miurata; K. Nishimura: 2000. Utilisation of Residues at Sawmills, Plywood Mills and Precut Factories in Japan, IUFRO XXI World Congress, Kuala Lumpur, 2000.
Velázquez, D.; K. Manzanares; Ma. A. Guyat: «Dosificación de probetas con agregados locales», Revista Forestal Baracoa 24(2):77-82, 2005.