Control de calidad en los aserraderos
Article Sidebar
Main Article Content
Abstract
The objective of this work is guided to offer some considerations to improve the levels of efficiency of wooden conversion of Pinus caribaea var. caribaea in bandsaw to use of a strategy to increase the dimensional quality of the sawn wood starting from the analysis of the behavior of the current dimensions of the same and the variation of the one sawed. We built “Control” software witch allows the determining the good dimensions of having sawed as well as the determination of the variation of having sawed. It has observed that in the sawmills exists an undersizing fundamentally in the selections 50, 75, 100 mm; as well as an excessive variation of having sawed. It is necessary to eliminate these deficiencies of the actions correctives witch are directed fundamentally to those parts of machines responsible with the variation of having sawed controlling the court outlines selected by the sawyer.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms of the License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0):
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
The journal is not responsible for the opinions and concepts expressed in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. They are accepted to publish original scientific papers, research results of interest that have not been published or sent to another journal for the same purpose.
The mention of trademarks of equipment, instruments or specific materials is for identification purposes, and there is no promotional commitment in relation to them, neither by the authors nor by the publisher.
How to Cite
References
Brown, T. D.: «Determining Lumber Target Sizes and Monitoring Sawing Accuracy», Forest Product Journal 29(4):48-54, 1979.
Brown, T. D.: Lumber Size Control» Forestry Business, College of Forestry, Oregon State
University, E. U., 1986.
Casado, M. M.: Tecnología de las industrias forestales, t. I, Serie Forestal 26, Escuela Técnica Superior de Ingenierías Agrarias, Universidad de Valladolid, 1997.
Denig, J.: Control de la calidad en aserraderos de pino del sur, North Carolina Cooperative Extension Service, 1990.
––––: Hardwood Sawing Fundamentals: Key to Increasing Dollar Recovery, North Carolina Cooperative Extension Service, 1995.
FAO.: Cuidado y mantenimiento de sierras, Estudios FAO, Montes 58, Roma, 1989.
García, R.: Normalización, metrología y control de la calidad para la industria ligera, Ed. Pueblo y Educación, La Habana, 1991.
Ibáñez, A.: 1975.:«Informe sobre nueve especies maderables cubanas», Instituto de Investigaciones Forestales. Ministerio de la Agricultura, La Habana, 1991.
Pacheco, M. M.; P. Pacheco: «Análisis del comportamiento de la producción de madera aserrada en el establecimiento Álvaro Barba utilizando gráficos de control», Universidad de Pinar del Río, Cuba, 1988.
Segura, N. A.; L. Londres: «Análisis del comportamiento de la producción de madera aserrada en el establecimiento La Jagua utilizando gráficos de control», Universidad de Pinar del Río, Cuba, 1990.
Steele, P.; T. El-Radi; S. H. Bullard: «Direct Comparison of Processing Technology in Hardwood and Softwood Sawmills», Proceedings of Structural Panels and Composites Lumber Symposium, E. U., 1992.
Zavala, D.: «Analysis of the Sawmilling Practices in the State of Durango, México», Master Theses. British Columbia University. Vancouver, B. C., Canadá, 1981.
––––: «Manual para el establecimiento de un sistema de control de la variación de refuerzos en madera aserrada», Serie de Apoyo Académico 44, Universidad Autónoma, Chapingo, 1991.